Pivot Nut 1/2″ for Playfield Support-Williams-Bally

$5.59 USD

6 in stock

Description

Pivot Nut 1/2″

Used inside the Cabinet Body, it attaches to the large carriage bolts that go through each side of the cabinet.

When you raise, and lower the playfield, these nuts are what the whole playfield rest on.(see photo gallery)

They are often missing, and the playfield is pivoting on the carriage bolt, or they are deeply scored, and worn out.

Worn and/or missing pivot nuts will cause your playfield to have a uneven pitch.

Used on Williams from mid 80’s to the end of production.

Used on Bally from 1988 to the end of Production.

3 different sizes were used over the years, if your not sure what is required on your pin, just call, or email.

02-4329

Additional information

Weight .01 kg
Dimensions 1.5 × 1 × 1 cm

Inquiry

If you have any questions about any of our products, don’t hesitate to reach out! You can also give us a call at 1-306-955-6636.