Right Flipper Base Plate Assembly Williams 84 & up Bally 88 & up

$16.98 CAD

15 in stock

Description

Here is the Right main base mounting plate for the flipper assembly on Williams / Bally

Williams-Fire Power to the end.

Bally-Truckstop to the end.

Williams: B-13104-R

Most common requirement for replacing is:

  1. Stripped coil stop threads.
  2. Fatigue cracks

These can also be used on Williams 1977-80 era (Hot Tip–Laser Ball) that have the “straight” flipper system without a baseplate, BUT only if you have enough room under the playfield to mount the plate.(see photo gallery)

They can, and should be used as a direct replacement for the one piece base plate (C-8230-L/R & C-8270-L/R series without a detaching coil stop) found on Williams from 1980-84 starting with Firepower to Laser Cue.

Changing over to this new C-11626-L/R Flipper Series base plate make future flipper rebuilds so much easier.

Don’t forget to order the switch mounting bracket, as on your old unit it may be spot welded in place.

Check other components too, such as bushings, rubber stop, and so on.

Additional information

Weight .179 kg
Dimensions 13.5 × 10.5 × 5.5 cm

Inquiry

If you have any questions about any of our products, don’t hesitate to reach out! You can also give us a call at 1-306-955-6636.