Ball Gate Bracket & Wireform Offset 4-3/8″ Mount Used

$29.98 CAD

1 in stock


Salvaged from a pin parted over 20 years ago.

Kept in heated storage.

This is a very special fit gate.

Mounting holes are 4-3/8″ on center with 1/8″ play to left, or right; but note the right mounting point is staggered back about 1/4″ from the left side.

The wire gate form rests 5/8″ deep.

The wire form gate area is 2-3/4″ wide.

To me, looks like it’s off a ramp entrance.

Used product, so it’s not perfect.

Additional information

Weight.01 kg
Dimensions12 × 5 × 1 cm


If you have any questions about any of our products, don’t hesitate to reach out! You can also give us a call at 1-306-955-6636.