Designed to be used in a tabletop, or upright cabinet.
These are older games, where the players alternate turns. In a upright, once the first player is done, player-2 steps up to play.
In the tabletop cabinet setting 277 of these games flip, and 135 DO NOT.
So, if installed into a table be aware with the 135 games that DO NOT FLIP, if your playing 2-player , once player-1 is done, player-2 plays on the same side of the table.
Requires 1 joystick, and a minimum 2 button control panel layout, but 3 buttons is best.
The edge connector is a standard JAMMA 56-pin, requiring both +5 & +12 VDC.
A trackball can be plugged directly into the board, but it’s not a simple procedure.
It will run on a classic CRT tube monitor, or a new lightweight flat screen LCD VGA, which plugs directly into the board.
Advise what type of monitor you are using and I will set the board up in advance.
For anyone wondering if you can unplug your dead Pac-man, or Miss Pac-man board, plug this in, and be back in business–Well it is not that simple–Don’t do it!
You need to convert your cabinet wiring harness over to a JAMMA.
I do offer a more complete kit which includes the wiring harness, power supply, joysticks, and buttons.
Note: All boards video recorded, (showing serial number) operational, prior to shipping.